SPECIFICATIONS：
|
MODEL |
CNC700 |
|
| Table Size |
305x712mm |
|
| Longitudinal Movement Speed |
0.5~25M/min |
|
| Cross Transverse Travel | Min. Setting Unit |
0.001mm |
| MPG |
Handwheel graduation x 1, 0.001mm x 10, 0.01mm x 100, 0.1mm |
|
| Rapid Speed |
1000mm/min |
|
| WheelfeedVertical Infeed | Min. Setting Unit |
0.001mm |
| MPG |
Handwheel graduation0.001mm x 1, 0.001mm x 10, 0.001mm x 100 |
|
| Rapid Speed |
750mm/min |
|
| Spindle Drive | Power Rating |
Standard 3.7KW(5HP) Optional 5.55KW(7 1/2HP)., 7.4KW(10HP) |
| Speed |
50HZ,1450 R.P.M.;60HZ,1750 R.P.M. |
|
| Standard Grinding Wheel | Diameter |
ø 355mm |
| Width |
50mm |
|
| Bore |
ø 127mm |
|
| Hydraulic Motor |
3.0HP |
|
| Floor Space |
2950x2150x2150mm |
|
NOTE：
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.
GENERAL FEATURES：
| 1.STRUCTURE:
Remote manual pulse generator for vertical & crossfeed C3 class vertical & crossfeed ballscrew Spindle frequency inverter Verical & crossfeed servo motor control system, man-manchine interface w/10.4″ color tft display, plc w/ncmode control Longitudinal movement servo hydraulic control system Unique longitudinal hydraulic circuitry system is available for slow movement from either direction ( suitable for big downfeed at slow table movement )
2.CONTROL SYSTEM: High industrial class plc control system w/nc program mode
3.SOFTWARE SYSTEM: Man-machone conversational diagram data input working system Easy to learn and operate Learn it in 4 hours grinding set in 10 minutes for new workpiece
4.STANDARD FUNCTION: Surface grinding (cross step feed constant feed, and 3 steps downed) Plunge grinding (2 steps downed) Groove bottom surface grinding (cross step feed & constant feed, 2 steps downed) Multi-plunge grinding system suitable for un-equidepth, concave, convex, and trapezoidal plunge grinding (only by cbn forming wheel, forming device, or on-table wheel derssing attachment)
5.DURING GRINDING: The infeed amount is adjustable any time The grinding wheel could be forced rise up Can be stopped and proceeded for workpiece checking Can be forced for wheel dressing or dressing setting change
6.OPTIONAL ACCESSORIES: Overhead wheel auto dressing & auto compensation system On-table wheel auto dressing & auto compensation system The fourth axis scale plate and special clamper for workpiece |
